구분 : Navigation Updater
'An error occurred while copying from PC to a removable storage device’
When you see a message saying, ‘An error occurred while copying from PC to a removable storage device,’ with one of the following error codes, it can be due to various reasons related to SD Card/ SD card reader, USB, PC security setting, or others. Therefore, please refer to the solutions below to fix the problem.

▷ Error Code 201: ERR_COPY (file name)
▷ Error Code 202: ERR_FILE_SIZE (file name)
▷ Error Code 203: ERR_FILE_CRC (file name)
▷ Error Code 204: ERR_REMOVED_FLASH


  • How to fix the error code issue
  1. Check an SD card/ SD card reader, USB connection
  2. Temporarily disable or shut down firewall/security program (Refer to ‘An error occurred while downloading/decompressing)
     Go to ‘An error occurred while downloading/decompressing.’  ☜ Click
  3. If it happens when directly downloading to an SD card or USB, download the updated data first then copy it to a removable storage device manually.
    1. How to download the updated data on your hard disk
      1. Open Navigation Updater
      2. Select vehicle/model and click ‘Confirm’
      3. Select ‘Hard Disk’ in the save location then click ‘Next’
      4. Click [Change] then click [Desktop] > [Select Folder] before clicking ‘Confirm’
      5. Download starts as a holder with a vehicle name is being created on the desktop that has been selected in 4)

    2. How to manually format an SD card/USB
      1. Double click ‘Computer (or My Computer, My PC)’ on the desktop
      2. Click the right button on the mount over the recognized removable disk drive > Click [Format] in the menu
      3. Select [FAT32] under File System and [32KB] for allocation unit size > put a checkmark in [Fast Format] before tapping [Start]
        ▷ In some vehicle types, you should select [exFAT] instead of [FAT32] for the File System.     
         For the relevant vehicle types, please refer to the below [Distinction between vehicles applicable for FAT32 and exFAT Formats].
      4. When a warning window pops up, [Confirm] > Format Completion message [Confirm] > Format window [Close]

    3. How to install data on an SD Card/USB
      1. Double-click the vehicle named folder in the new desktop folder configured in 
      2. Select all folders/files inside the vehicle named folder (Ctrl+A) then copy (Ctrl+C or copy after right-clicking the mouse button)
      3. Paste (Ctrl+V or paste after right-clicking the mouse button to the SD card/USB completely formatted in 
※ If you cannot format an SD card/USB manually in your PC, or continue to experience the same issue while copying an SD card/USB, please try other PCs or SD card readers.

※ Distinction between vehicles applicable for FAT32 and exFAT Formats
Target
Navigation Updater Format Type
Standard Gen4
FAT32
Standard Gen5
FAT32
Standard Gen5W
exFAT
Economy
FAT32
Premium Gen2
FAT32
Premium Gen5
exFAT