Update Guide for Display Audio Gen1

  • Depending on the vehicle and specification, your screen may look different from the one shown below.

  • Software Download Process (Computer):
    1. Select the download file from the following list that corresponds to your vehicle.
      2. Vehicle Model SW version Download
      OPTIMA 2017-19 OPTIMA
      		JFPE.USA.SOP.V108.221011
      		Download
       2018-20 OPTIMA Hybrid
      		JFPEHEV.USA.SOP.V108.221012
      		Download
      NIRO
      		2019 NIRO Electric
      		DEEV.USA.SOP.V108.221012
      		Download
      2018-19 NIRO Plug-in Hybrid
      		DEPHEV.USA.SOP.V108.221011
      		Download
      SPORTAGE
      		2021 SPORTAGE
      		QL21.USA.SOP.V117.221007
      		Download
      2019-20 SPORTAGE
      		QLPE.USA.SOP.V108.221012
      		Download
      TELLURIDE
      		2020 TELLURIDE
      		ON.USA.SOP.V115.221011
      		Download
    2. If you are using Internet Explorer, it will ask you to save the file.


    3. If you are using Chrome Browser, the download will start automatically.


    4. Save the download file on your desktop or laptop. Note the file name and where it was saved.
      Example: ql21my.zip
    5. Insert an "empty" USB drive (4GB minimum) into the desktop/laptop USB port.

    6. From the desktop/laptop, open the downloaded file(zip) and copy the included DAUDIO folder shown to the USB drive.


  • In Vehicle Download Instructions:
    Follow the steps below to check the software version information for the Display Audio system installed in your vehicle.
    1. Press the "Setup" key or tap the Setup touchscreen button in the All Menus section of the Display Audio system.

    2. Tap "System Info" to check the vehicle's software version.


    3. If your vehicle's installed Software Version("SW Ver.") is the same software version as the update, no further action is necessary.
      If it is different, continue to the next step.

    4. Insert the USB device that contains the DAUDIO folder into the USB port in your vehicle.

    5. Tap the "Update" button.

    6. Confirm the update by pressing "OK".
The update process will take 10-15 minutes to complete.
Please leave your vehicle running and DO NOT remove the USB device until the update is complete.